Design, Fabrication, and Testing of a New Small Wind Turbine Blade

The Atrium, University of Guelph Institutional Repository

Design, Fabrication, and Testing of a New Small Wind Turbine Blade

Show simple item record

dc.contributor.advisor Lubitz, William David
dc.contributor.author Song, Qiyue
dc.date 2012-04-23
dc.date.accessioned 2012-05-01T17:30:33Z
dc.date.available 2012-05-01T17:30:33Z
dc.date.issued 2012-05-01
dc.identifier.uri http://hdl.handle.net/10214/3542
dc.description.abstract A small wind turbine blade was designed, fabricated and tested in this study. The power performance of small horizontal axis wind turbines was simulated in detail using modified blade element momentum methods (BEM). Various factors such as tip loss, drag coefficient, and wake were considered. The simulation was validated by experimental data collected from a small wind turbine Bergey XL 1.0. A new blade was designed for the Bergey XL 1.0 after comparing three types of aerodynamic blade structures and their related performance, and then the detailed blade structure was determined. The performance of the new rotor at different additional pitch angles was simulated and compared with the original Bergey XL 1.0 rotor. To fabricate prototypes of the new blades, a resin transfer moulding (RTM) system was designed and built. Three blades were fabricated successfully and installed on the hub of an existing Bergey XL 1.0. In a vehicle-based test system, the new blades were tested at the original designed pitch angle, plus at additional 5° and 9° pitch angles. The +5° rotor reached maximum power of 1889 W at wind velocity 13.6 m/s. The +9° rotor performed over a wider wind velocity range and output slightly lower power than the original Bergey XL 1.0. The new blades have better aerodynamic performance than original Bergey XL 1.0. en_US
dc.description.sponsorship Ontario Ministry of Agriculture and Rural Affairs (OMAFRA) New Directions Research Program and the National Sciences and Engineering Research Council (NSERC) Chair in Environmental Design Engineering at the University of Guelph en_US
dc.language.iso en en_US
dc.subject small wind turbine en_US
dc.subject BEM en_US
dc.subject RTM en_US
dc.subject vehicle based test en_US
dc.title Design, Fabrication, and Testing of a New Small Wind Turbine Blade en_US
dc.type Thesis en_US
dc.degree.programme Engineering en_US
dc.degree.name Master of Applied Science en_US
dc.degree.department School of Engineering en_US


Files in this item

Files Size Format View Description
Song_Qiyue_thesis_04_30_2012_final.pdf 4.481Mb PDF View/Open Song_Qiyue_Thesis_MASc

This item appears in the following Collection(s)

Show simple item record

Search the Atrium


Advanced Search

Browse

My Account